| New York Central Lima-Hamilton A-3174 #6210, built September 1950 (c/n 9433) at Englewood, Chicago, Illinois, March 14, 1965, photo by Chuck Zeiler. Lima-Hamilton did not have diesel locomotive model numbers, using instead a specification number, in this case A-3174. The specifications for this model were: a Hamilton Model T-89-SA four cycle 1200 horsepower turbocharged eight cylinder diesel prime mover, coupled to a Westinghouse 499A main generator powering four 362D traction motors. The electrical equipment was supplied by Westinghouse. The trucks were General Steel Castings Type B Swing Bolster with 40 inch wheels geared for 60 mph. It carried 800 gallons of fuel, 40 cubic feet of sand, 145 gallons of lube oil, 225 gallons of engine cooling water, and 800 gallons of water for the steam generator, which produced 1600 pounds of steam per hour. They weighed 247,500 pounds as built. According to tVe book, "Diesel Locomotive Rosters", The Railroad Magazine Series, 16 oa this model were built for the NYC as #5800-5815, renumbered 6200-6215, classed as DRSP-5a on the NYC. However, #'q 6200-6204, 6206-6209, 6212-6215 had the steam generators removed, were re-classed as DRS-5a, and thus weighed 240,800 pounds, and produced 60,200 pounds of tractive effort. As far as I can tell, these were the only examples of the A-3174 built by L-H. |